Factory rear bumpers offer little protection and often store the spare wheel in a vulnerable, inaccessible location under the vehicle. This Kaymar Rear Bar replaces this with a heavy-duty steel structure that shields the rear and quarter panels of your LandCruiser Troop Carrier. Its signature dual swing-away carriers move two spare wheels to an easily accessible position, freeing up crucial space under the vehicle for long-range fuel tanks or other modifications.

Built in Australia for the world’s toughest conditions, every Kaymar bar features a vehicle-specific design with heavy-duty pivot points, over-centre locking mechanisms, and integrated LED signal lights. As a Rear Step Tow Bar Kit, it includes both Left Hand and Right Hand Wheel Carriers, making it the ultimate modular solution for equipping your Troop Carrier for remote exploration.

*** Bash plate and shackles sold separately ***

Features:

• ADR compliant
• Airbag compatible 
• Bumper replacement no cutting of bumper or grill.
• Works with factory parking sensors, adaptive cruise radar and head light washers
• Welded one piece bar with welded wing supports for super toughness
• Only sits 120-130mm out from front of grill. Compare that to our standard 3 letter competitors 
• Zinc plated then powder coated Matte black
• Suits most low mount winches up to 12,000lb, including Warn Zeon
• Suits Factory fog lights in wings
• Easily mount 2 Cube lights (per wing) or up to an 7.5″ LED light bar in each wing.   
• Number plate flip included for those running a winch
• Can be colour coded to vehicle
• Made mainly from 3mm and 5mm steel

While the bumper takes most single row led light bars (we suggest the Offroad Animal 22″ LED light bar) If you don’t want to run this light we supply a cover plate.

What’s in the box

• 1 x Front bar weldment
• 1 x LH chassis impact bracket
• 1 x RH chassis impact bracket
• 1 x mesh fairlead mount
• 1 x Mesh infill LH
• 1 x Mesh infill RH
• 1 x Light cover Mesh LH
• 1 x Light cover Mesh RH
• 1 x centre bash plate
• 2 x Chassis bracket gusset 
• 2 x Antenna brackets for top of tube
• 1 x number plate flip
• A butt load of nuts and bolts to make it all sit nice and pretty

This bar suits:

 All Prado 150 models, 2018- 2024.  If you have a Kakadu let us know so we can supply the correct bash plate

Install time: 4 hours

Install difficulty: 4/10

*Fitting partner refers to approved Offroad Animal partners or authorised branded stores located closest to you. Once your order is placed, our team will contact you to confirm and direct you to your nearest suitable fitting location.

** Installation pricing is based on standard OEM vehicles using generic wiring harnesses and switches. Any additional

requirements—including factory switch integration, custom wiring, or

non-standard accessories—may incur additional charges payable directly to the

fitting partner at the time of installation. Non-standard or additional items

(such as UHF units or other branded lighting and accessories) can also be

sourced and supplied directly through the fitting partner if required.

Freight: If selecting installation, please choose freight to the nearest fitting centre. If there is any discrepancy in the final

freight cost, this will be reviewed and adjusted accordingly.

Note: Some images depict prototype products. The actual final product may vary in appearance.

Colour-coded bars are not an exact paint match; the

finish will be a close approximation only. Please provide your VIN so we can

confirm the correct colour code. Note that selecting colour coding typically

adds an additional 4–6 weeks to the lead time.

If $9999 appears in the freight charge, please check address information is entered correctly as per Australia po

Features

• ADR compliant
• Airbag compatible 
• Bumper replacement no cutting of bumper or grill.
• Welded top hoop section for maximum strength. 
• Works with factory parking sensors, adaptive cruise radar and head light washers
• Welded one piece bar with welded wing supports for super toughness
• Only sits 120-130mm out from front of grill. Compare that to our standard 3 letter competitors 
• Zinc plated then powder coated Matte black
• Suits most low mount winches up to 12,000lb, including Warn Zeon
  
• Suits Factory fog lights in wings
• Easily mount 2 Cube lights (per wing) or up to an 7.5″ LED light bar in each wing.   
• Number plate flip included for those running a winch
• Can be colour coded to vehicle
• Made mainly from 3mm and 5mm steel

While the bumper takes most single row led light bars (we suggest the Offroad Animal 22″ LED light bar) If you don’t want to run this light we supply a cover plate.

Included in box

• 1 x Front bar weldment
• 1 x LH chassis impact bracket
• 1 x RH chassis impact bracket
• 1 x mesh fairlead mount
• 1 x Mesh infill LH
• 1 x Mesh infill RH
• 1 x Light cover Mesh LH
• 1 x Light cover Mesh RH
• 1 x centre bash plate
• 2 x Chassis bracket gusset 
• 2 x Antenna brackets for top of tube
• 1 x number plate flip
• A butt load of nuts and bolts to make it all sit nice and pretty

This bar suits All Prado 150 models, 2018-2024.  If you have a Kakadu let us know so we can supply the correct bash plate

Install time: 4 hours

Install difficulty: 4/10

*Fitting partner refers to approved Offroad Animal partners or authorised branded stores located closest to you. Once your order is placed, our team will contact you to confirm and direct you to your nearest suitable fitting location.

** Installation pricing is based on standard OEM vehicles using generic wiring harnesses and switches. Any additional

requirements—including factory switch integration, custom wiring, or

non-standard accessories—may incur additional charges payable directly to the

fitting partner at the time of installation. Non-standard or additional items

(such as UHF units or other branded lighting and accessories) can also be

sourced and supplied directly through the fitting partner if required.

Freight: If selecting installation, please choose freight to the nearest fitting centre. If there is any discrepancy in the final

freight cost, this will be reviewed and adjusted accordingly.

Note: Some images depict prototype products. The actual final product may vary in appearance.

Colour-coded bars are not an exact paint match; the

finish will be a close approximation only. Please provide your VIN so we can

confirm the correct colour code. Note that selecting colour coding typically

adds an additional 4–6 weeks to the lead time.

If $9999 appears in the freight charge, please check address information is entered correctly as per Australia post.

4inch stainless snorkel for the Toyota Landcruiser Prado 150 Series.

Available in Short Entry or Mid Entry.

Please choose your items carefully as we do not offer refunds for change of mind: Refund Policy

Designed and fabricated by the team at Fabulous Fabrications. Each snorkel is hand crafted in house, made from the finest 316 stainless steel and purge welded to guarantee longevity and a superior quality finish. 

Each snorkel comes with a 3mm laser cut endcap, all required fixtures and fittings and a comprehensive fitting guide to ensure a trouble free installation. 

Please note: our templates are hand drawn for accuracy and copied on paper or light card. The reason for this, is that we have found that paper/light card is easily manipulated and therefore has been the best option for us being able to accurately modify our templates to suit each vehicle.

DISCLAIMER: WITH THE FITMENT OF THIS SNORKEL, AUTOMATIC FOLDING MIRROR FUNCTION IS NO LONGER USEABLE, AS WHEN FOLDED THE MIRROR TOUCHES THE SNORKEL. 

RECOMMENDED FITTING TIME: 2.5 HOURS